DriverCove

Xerox - Imaging, Printing - Xerox WorkCentre 3119 Series Driver 1.4.8.0

by Xerox8.18764-bitSHA-256 verified

Manufacturer
Xerox
Device
Xerox - Imaging, Printing - Xerox WorkCentre 3119 Series
Driver version
1.4.8.0
Release date
April 6, 2007
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64)
File size
2.8 MB
File name
20062314_b8312b670247801f58d9c5af1f6186d030417b0f.cab
Digital signature
Signed - catalog WC3119.cat
INF version
04/06/2007,1.4.8.0
INF provider
Xerox
Device class
Image
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
ceb508ce2a068f5b7c9ed9dd852a21c7e5d0c025123b0b90e8a98fc888be61f8

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).