DriverCove

Stellaris ROM DFU Bootloader Driver 1.2.7922.0

by Texas Instruments IncWindows 1064-bitSHA-256 verified

Manufacturer
Texas Instruments Inc
Device
Stellaris ROM DFU Bootloader
Driver version
1.2.7922.0
Release date
December 31, 2015
Supported Windows
Windows 10
Architecture
64-bit (x64)
File size
4.6 MB
File name
45294f56-105a-4b66-9db4-c6f2145b33b3_200222dcdb969d7a4e2facd16c2bf024ef82504e.cab
Digital signature
Signed - catalog boot_usb.cat
INF version
12/31/2015,1.2.7922.0
INF provider
Texas Instruments Inc.
Device class
StellarisDFUDeviceClass
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
0e4bff8e83d1552e37fcd50f2a4a701cefe9da4a378e5447662d66f59d183627

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 10) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).