DriverCove

Schweitzer Engineering Laboratories, Inc. - Other hardware - SEL Fast CDC USB Device Driver 5.0.2153.2

by Schweitzer Engineering Laboratories, Inc.8764-bit32-bitSHA-256 verified

Manufacturer
Schweitzer Engineering Laboratories, Inc.
Device
Schweitzer Engineering Laboratories, Inc. - Other hardware - SEL Fast CDC USB Device
Driver version
5.0.2153.2
Release date
August 15, 2013
Supported Windows
Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
22 KB
File name
20587777_1c039aa55ae2b98cb86ea64e72eef3251c5e7db4.cab
Digital signature
Signed - catalog sel_fast_cdc_usb_device.cat
INF version
08/15/2013,5.0.2153.2
INF provider
Schweitzer Engineering Laboratories, Inc.
Device class
Ports
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
587a1b7bf0c819c5327abfa368f792c758820c8e8a662c2acf096a3fe1d2beed

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).