DriverCove

RadioShack - Bus Controllers and Ports - Radioshack USB to Serial Cable Driver 3.1.0.0

by RadioShack8764-bit32-bitSHA-256 verified

Manufacturer
RadioShack
Device
RadioShack - Bus Controllers and Ports - Radioshack USB to Serial Cable
Driver version
3.1.0.0
Release date
June 25, 2007
Supported Windows
Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
75 KB
File name
20106991_e152ebcce3e18e6e77cf6bc948b8886c9dcd68de.cab
Digital signature
Signed - catalog ser2rs.cat
INF version
06/25/2007,3.1.0.0
INF provider
RadioShack
Device class
Ports
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
b65c9f32b9d1d0d7936a00594d872f793432d9fc7f41c91e6a8ba47cf90604c3

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).