DriverCove

NTT Communications Corp. - Other Hardware - SCR3310-NTTCom USB SmartCard Reader Driver 4.32.0.1

by NTT Communications Corp.XP32-bitSHA-256 verified

Manufacturer
NTT Communications Corp.
Device
NTT Communications Corp. - Other Hardware - SCR3310-NTTCom USB SmartCard Reader
Driver version
4.32.0.1
Release date
August 3, 2006
Supported Windows
Windows XP
Architecture
32-bit (x86)
File size
37 KB
File name
20007993_041f315cd1abb6d853805312e04f2b2ea03a6d00.cab
Digital signature
Signed - catalog NSR3310f.cat
INF version
08/03/2006,4.32.00.01
INF provider
NTT Communications Corp.
Device class
SmartCardReader
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
75c9300ff0151b5a0575b40c47a718f74d6525cf243ccdb5a3213f868a8c82d3

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows XP) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).