NEXiO Sync Driver 7.0.0.0
by FIHWindows 11Windows 1032-bitSHA-256 verified
- Manufacturer
- FIH
- Device
- NEXiO Sync
- Driver version
7.0.0.0- Release date
- June 28, 2008
- Supported Windows
- Windows 11, Windows 10
- Architecture
- 32-bit (x86)
- File size
- 11.0 MB
- File name
20220730_4d09e93e5f99b89ffbb2946e56a99f3927f64011.cab- Digital signature
- Signed - catalog
wceusbsh.cat - INF version
06/28/2008,7.0.0000.0- INF provider
- FIH
- Device class
- WCEUSBS
- Source
- Microsoft Update Catalog
- Last verified
- July 7, 2026
- SHA-256
4da57ef75db0324965be94a76c3d05370878ddc3687e1e7e41bb3b496298800e
Supported hardware IDs (13)
- USB\VID_045E&PID_04EB&MI_01
- USB\VID_0489&PID_00CE
- USB\VID_0489&PID_7001
- USB\VID_0489&PID_7002
- USB\VID_0489&PID_7003
- USB\VID_0489&PID_7004
- USB\VID_0489&PID_7005
- USB\VID_0489&PID_7006
- USB\VID_0489&PID_7007
- USB\VID_0489&PID_7008
- USB\VID_0489&PID_7009
- USB\VID_0489&PID_700A
- USB\VID_0489&PID_FFFF
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows 11, Windows 10) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).