DriverCove

National Instruments - Other hardware - NI VB-8034 Interface 2 of 4 Driver 15.2.0.49152

by National InstrumentsWindows 1064-bitSHA-256 verified

Manufacturer
National Instruments
Device
National Instruments - Other hardware - NI VB-8034 Interface 2 of 4
Driver version
15.2.0.49152
Release date
January 27, 2016
Supported Windows
Windows 10
Architecture
64-bit (x64)
File size
74 KB
File name
20841970_59807c2f5c936cf775611f3a6990c07ad7289e70.cab
Digital signature
Signed - catalog nilcidrv.cat
INF version
01/27/2016,15.2.0.49152
INF provider
National Instruments
Device class
VirtualBenchDevice
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
0a586aae89608607343626b3958cb76bea31b3c3031a9e716c407c335b532365

Supported hardware IDs (8)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 10) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).