DriverCove

National Instruments - Other hardware - NI VB-8012 Interface 4 of 4 Driver 1.0.2.49152

by National Instruments764-bitSHA-256 verified

Manufacturer
National Instruments
Device
National Instruments - Other hardware - NI VB-8012 Interface 4 of 4
Driver version
1.0.2.49152
Release date
March 18, 2014
Supported Windows
Windows 7
Architecture
64-bit (x64)
File size
71 KB
File name
20650824_9df9956b6f449ac44f85e30d8efe8e593394ccef.cab
Digital signature
Signed - catalog nilcidrv.cat
INF version
03/18/2014,1.0.2.49152
INF provider
National Instruments
Device class
VirtualBenchDevice
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
6bc83ee7b851151d68f1c14f09e4cd162185ce8a6414d2e4a780797db2b9389a

Supported hardware IDs (4)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 7) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).