DriverCove

National Instruments - Other hardware - NI VB-8012 Interface 2 of 4 Driver 1.0.2.49152

by National Instruments864-bitSHA-256 verified

Manufacturer
National Instruments
Device
National Instruments - Other hardware - NI VB-8012 Interface 2 of 4
Driver version
1.0.2.49152
Release date
March 18, 2014
Supported Windows
Windows 8
Architecture
64-bit (x64)
File size
71 KB
File name
20650826_46ca6edc518cdf9d049adad5cb0d9007edd5f517.cab
Digital signature
Signed - catalog nilcidrv.cat
INF version
03/18/2014,1.0.2.49152
INF provider
National Instruments
Device class
VirtualBenchDevice
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
26687a198dfbc9da0b79bf8c8c90350e7103277749d0490332d29d13a123566d

Supported hardware IDs (4)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).