microSensys RFID device Driver 2.12.36.4
by microsensys8.1832-bit64-bitSHA-256 verified
- Manufacturer
- microsensys
- Device
- microSensys RFID device
- Driver version
2.12.36.4- Release date
- July 5, 2021
- Supported Windows
- Windows 8.1, Windows 8
- Architecture
- 32-bit (x86), 64-bit (x64)
- File size
- 960 KB
- File name
e82e26a2-4d89-4681-8a68-c53ae22838f4_7a45c1e10af6b26fe9edd5faaa95756bb6784032.cab- Digital signature
- Signed - catalog
MICSport.cat - INF version
07/05/2021,2.12.36.4- INF provider
- microsensys
- Device class
- Ports
- Source
- Microsoft Update Catalog
- Last verified
- July 8, 2026
- SHA-256
4a62a1e7142d0e2e0d65635fac89111c59647838e60921e9eb5e7c484fea2192
Supported hardware IDs (12)
- FTDIBUS\COMPORT&VID_0403&PID_B0C0
- FTDIBUS\COMPORT&VID_0403&PID_B0C1
- FTDIBUS\COMPORT&VID_0403&PID_B0C2
- FTDIBUS\COMPORT&VID_0403&PID_B0C3
- FTDIBUS\COMPORT&VID_0403&PID_B0C4
- FTDIBUS\COMPORT&VID_0403&PID_B0C5
- USB\VID_0403&PID_B0C0
- USB\VID_0403&PID_B0C1
- USB\VID_0403&PID_B0C2
- USB\VID_0403&PID_B0C3
- USB\VID_0403&PID_B0C4
- USB\VID_0403&PID_B0C5
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows 8.1, Windows 8) and architecture (x86, x64)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).