DriverCove

Identive - Other hardware, Smartcard Reader - STC3 USB Smart Card Reader Driver 1.12.0.0

by IdentiveWindows 108.18764-bit32-bitSHA-256 verified

Manufacturer
Identive
Device
Identive - Other hardware, Smartcard Reader - STC3 USB Smart Card Reader
Driver version
1.12.0.0
Release date
September 13, 2012
Supported Windows
Windows 10, Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
64 KB
File name
20515224_93ccf30201bf06d198a1022ad1c2cf26703c782d.cab
Digital signature
Signed - catalog SCKB.cat
INF version
09/13/2012,1.12.0.0
INF provider
Identive
Device class
SmartCardReader
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
2621edf9db84fb3abbe77d948d72bd0eac52d57dbbf84627a94cff7df67460b1

Supported hardware IDs (2)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 10, Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).