DriverCove

Gemalto - Other hardware - GCR730 Virtual Comm port Driver 6.0.2600.1

by Gemalto8.187XP32-bitSHA-256 verified

Manufacturer
Gemalto
Device
Gemalto - Other hardware - GCR730 Virtual Comm port
Driver version
6.0.2600.1
Release date
March 26, 2007
Supported Windows
Windows 8.1, Windows 8, Windows 7, Windows XP
Architecture
32-bit (x86)
File size
715 KB
File name
20111937_8ff9deabe6a934c93fb765e42d6d3919db1ec904.cab
Digital signature
Signed - catalog Gemscope.cat
INF version
03/26/2007,6.0.2600.1
INF provider
Gemalto
Device class
Ports
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
a19a8eb652f458e795f933ddeedd1751d5b3c383a6be51203ed83903c0d3a0c6

Supported hardware IDs (2)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7, Windows XP) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).