FTDI - Other Hardware - USB Serial Converter Driver 1.0.2176.0
by FtdiXP32-bitSHA-256 verified
- Manufacturer
- Ftdi
- Device
- FTDI - Other Hardware - USB Serial Converter
- Driver version
1.0.2176.0- Release date
- December 12, 2005
- Supported Windows
- Windows XP
- Architecture
- 32-bit (x86)
- File size
- 130 KB
- File name
12353619_d08985f3c43526a2106c3a7f7442de66e0764111.cab- Digital signature
- Signed - catalog
ftdiport.cat - INF version
12/12/2005,1.00.2176- INF provider
- FTDI
- Device class
- Ports
- Source
- Microsoft Update Catalog
- Last verified
- July 8, 2026
- SHA-256
c92d8f03afe53af613b90de73effda637f3d68e93bbb873f3fa1f12d6b386296
Supported hardware IDs (10)
- FTDIBUS\COMPORT&VID_0403&PID_6001
- FTDIBUS\COMPORT&VID_0403&PID_6010
- FTDIBUS\COMPORT&VID_0403&PID_8372
- FTDIBUS\COMPORT&VID_065A&PID_C000
- FTDIBUS\COMPORT&VID_065A&PID_C001
- FTDIBUS\COMPORT&VID_0403&PID_0232
- FTDIBUS\COMPORT&VID_0403&PID_6007
- FTDIBUS\COMPORT&VID_0403&PID_6008
- FTDIBUS\COMPORT&VID_0403&PID_6009
- USB\VID_065A&PID_C000
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows XP) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).