DriverCove

DATACAN - Other hardware - DataCan Device March2016 Driver 2.12.16.0

by Datacan8.18764-bit32-bitSHA-256 verified

Manufacturer
Datacan
Device
DATACAN - Other hardware - DataCan Device March2016
Driver version
2.12.16.0
Release date
March 9, 2016
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
739 KB
File name
20889573_2d9aaa5675c99bf033c4bf553aa3bee8c64ff403.cab
Digital signature
Signed - catalog ftdiport.cat
INF version
03/09/2016,2.12.16
INF provider
DATACAN
Device class
Ports
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
e1ccf6e155b67370f8704a78d3c35a36611941814ff3104398f503745e34be8b

Supported hardware IDs (16)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).