ACR1222 1SAM PICC Reader Driver 1.0.0.3
by Advanced Card Systems Ltd.8.1864-bit32-bitSHA-256 verified
- Manufacturer
- Advanced Card Systems Ltd.
- Device
- ACR1222 1SAM PICC Reader
- Driver version
1.0.0.3- Release date
- November 10, 2011
- Supported Windows
- Windows 8.1, Windows 8
- Architecture
- 64-bit (x64), 32-bit (x86)
- File size
- 131 KB
- File name
20458324_d0655b10d6b2f9529e607efe402f4e69d945f61c.cab- Digital signature
- Signed - catalog
ACR1222.cat - INF version
11/10/2011,1.0.0.3- INF provider
- Advanced Card Systems Ltd.
- Device class
- SmartCardReader
- Source
- Microsoft Update Catalog
- Last verified
- July 8, 2026
- SHA-256
0940c4a01a6c0e8481fa59d21cea75d907d888bcad4d36287b9ec4e46ba2845a
Supported hardware IDs (14)
- *ACO0710
- *ACO0713
- USB\VID_072F&PID_1280
- *ACO0714
- USB\VID_072F&PID_2207
- *ACO0711
- *ACO0712
- *ACO0747
- *ACO0717
- *ACO0718
- *ACO0748
- USB\VID_072F&PID_2206
- USB\VID_072F&PID_2214
- USB\VID_072F&PID_222B
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows 8.1, Windows 8) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).