DriverCove

UTAX TA - Scanner - CDC 1626_DCC 2626 WIA Driver (USB) Driver 1.4.1914.0

by Utax/TA8.18764-bit32-bitSHA-256 verified

Manufacturer
Utax/TA
Device
UTAX TA - Scanner - CDC 1626_DCC 2626 WIA Driver (USB)
Driver version
1.4.1914.0
Release date
July 14, 2010
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
400 KB
File name
20372194_2fcc30f2801cacaa88a71dea5fc97e5e157dfab4.cab
Digital signature
Signed - catalog kmwiadrvu.cat
INF version
07/14/2010,1.4.1914
INF provider
UTAX/TA
Device class
Image
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
27ad78b9767fc642e4026b0d7bd7ee0cbc1961d92b2cfb27a3d8c6c15a8b1e02

Supported hardware IDs (2)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).