DriverCove

TiePie engineering - USBDevice - 10.0.0.0 Driver 10.0.0.0

by TiePie engineeringWindows 1032-bit64-bitSHA-256 verified

Manufacturer
TiePie engineering
Device
TiePie engineering - USBDevice - 10.0.0.0
Driver version
10.0.0.0
Release date
June 26, 2020
Supported Windows
Windows 10
Architecture
32-bit (x86), 64-bit (x64)
File size
15 KB
File name
tiepie-winusb-test_e3926c9a38130a7eba73d1d26cd13e2c04f8ea19.cab
Digital signature
Signed - catalog tiepie-winusb-test.cat
INF version
06/26/2020,10.0.0.0
INF provider
TiePie engineering
Device class
USBDevice
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
6dc97d0bc5c5eeba73fc0183dbfd926f2d04600831dd1bf2141d18bf07f72c25

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 10) and architecture (x86, x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).