DriverCove

Spartek Systems Inc - Other hardware - Spartek USB Interface Device Driver 2.8.24.0

by Spartek Systems Inc7XP32-bit64-bitSHA-256 verified

Manufacturer
Spartek Systems Inc
Device
Spartek Systems Inc - Other hardware - Spartek USB Interface Device
Driver version
2.8.24.0
Release date
September 11, 2012
Supported Windows
Windows 7, Windows XP
Architecture
32-bit (x86), 64-bit (x64)
File size
1.1 MB
File name
20511670_42c0c298732ff33481f16d057f08c519a9e91d9b.cab
Digital signature
Signed - catalog ftdibus.cat
INF version
09/11/2012,2.08.24
INF provider
Spartek Systems Inc
Device class
USB
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
10ad45ddffc6a7baa9fd93cb5f37b8424dadad21e3f829d14dd68102e7cef161

Supported hardware IDs (6)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 7, Windows XP) and architecture (x86, x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).