DriverCove

SMSC - LAN, Other hardware - LAN7505 USB 2.0 to Ethernet 10 100 1000 Adapter Driver 2.2.3.2

by Smsc8.1832-bitSHA-256 verified

Manufacturer
Smsc
Device
SMSC - LAN, Other hardware - LAN7505 USB 2.0 to Ethernet 10 100 1000 Adapter
Driver version
2.2.3.2
Release date
October 30, 2013
Supported Windows
Windows 8.1, Windows 8
Architecture
32-bit (x86)
File size
62 KB
File name
20604158_fbf7133c0cf2870578e4967ece31acfdc70c144e.cab
Digital signature
Signed - catalog lan7500-x86-n630f.cat
INF version
10/30/2013,2.2.3.2
INF provider
SMSC
Device class
Net
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
38f54cabfb676679816b336c3b5b6e64a98fc67b855e9c1406f20eabfaa45b6f

Supported hardware IDs (2)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).