DriverCove

Siemens Switzerland Ltd - Other hardware - Siemens I BT USB Remote NDIS Network Device Driver 8.2.0.0

by Siemens Switzerland LtdWindows 108.18764-bit32-bitSHA-256 verified

Manufacturer
Siemens Switzerland Ltd
Device
Siemens Switzerland Ltd - Other hardware - Siemens I BT USB Remote NDIS Network Device
Driver version
8.2.0.0
Release date
January 15, 2014
Supported Windows
Windows 10, Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
22 KB
File name
20622451_8050abe8e7b94d3e9c659498eadcc4323817f1df.cab
Digital signature
Signed - catalog device.cat
INF version
01/15/2014,8.2.0.0
INF provider
Siemens Switzerland Ltd
Device class
Net
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
fd2f48f2b7616b5c322a3110e89ea2fb2999365f51102ed8b439d12c292b3d6a

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 10, Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).