DriverCove

Schweitzer Engineering Laboratories - Other hardware - SEL-8000 on USB Driver 1.0.6.0

by Schweitzer Engineering Laboratories, Inc.8.187XP64-bit32-bitSHA-256 verified

Manufacturer
Schweitzer Engineering Laboratories, Inc.
Device
Schweitzer Engineering Laboratories - Other hardware - SEL-8000 on USB
Driver version
1.0.6.0
Release date
March 3, 2011
Supported Windows
Windows 8.1, Windows 8, Windows 7, Windows XP
Architecture
64-bit (x64), 32-bit (x86)
File size
903 KB
File name
20417684_9d9cb619c07038e429d149d73bc0304920fd7c22.cab
Digital signature
Signed - catalog sel8000usb.cat
INF version
03/03/2011,1.0.6
INF provider
Schweitzer Engineering Laboratories
Device class
USB
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
3bd7c0e9c6cb5c27eb85ff2178fc51feb37e0c0391b2402fdab4d79898d2aefe

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7, Windows XP) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).