SAS3008 PCI-Express Fusion-MPT SAS-3 Driver 2.50.75.0
by LSIWindows 11Windows 1032-bitSHA-256 verified
- Manufacturer
- LSI
- Device
- SAS3008 PCI-Express Fusion-MPT SAS-3
- Driver version
2.50.75.0- Release date
- November 22, 2013
- Supported Windows
- Windows 11, Windows 10
- Architecture
- 32-bit (x86)
- File size
- 728 KB
- File name
20611190_fa87ac75b38c2a2788828bc23d4421f8fe2a78c9.cab- INF version
11/22/2013,2.50.75.00- INF provider
- LSI Corporation
- Device class
- System
- Source
- Microsoft Update Catalog
- Last verified
- July 7, 2026
- SHA-256
827bdbc17bcbd883412c88c1d8367b2239f13b12ef7e4c6099d310f85332b5c3
Supported hardware IDs (43)
- SCSI\ENCLOSURESUN_____T4_STORAGE______
- SCSI\ENCLOSURE_____LSI______DE5300-SAS
- SCSI\ENCLOSURE_____LSI__DE5300-FUJITSU
- SCSI\ENCLOSUREIBM-ESXS_SAS_EXP_BP_____
- SCSI\ENCLOSUREIBM-ESXSBCS-DSS1___3GSAS
- SCSI\ENCLOSUREIBM-ESXSBCS-DSS2___3GSAS
- SCSI\ENCLOSUREIBM-ESXSVSC7160_________
- SCSI\ENCLOSUREIBM_____SAS_SES-2_DEVICE
- SCSI\ENCLOSUREINTEL___RES2CV240_______
- SCSI\ENCLOSUREINTEL___RES2CV360_______
- SCSI\ENCLOSUREINTEL___RES2SV240_______
- SCSI\ENCLOSURELSI_____SAS616X_________
- SCSI\ENCLOSURELSILOGIC___SASX36_A.1___
- SCSI\ENCLOSURELSILOGICSASX28_A.0______
- SCSI\ENCLOSURELSILOGICSASX28_A.1______
- SCSI\ENCLOSURELSILOGICSASX36_A.0______
- SCSI\ENCLOSURELSILOGICSASX36_A.1______
- SCSI\ENCLOSURELSILOGICX36_LYNX3090____
- SCSI\ENCLOSURESUN_____16DISK_BACKPLANE
- SCSI\ENCLOSURESUN_____BLADE_DISK______
- SCSI\ENCLOSURESUN_____BLADE_STORAGE_II
- SCSI\ENCLOSURESUN_____C4_NEM__________
- SCSI\ENCLOSURESUN_____HYDE12__________
- SCSI\ENCLOSURESUN_____HYDE24__________
- SCSI\ENCLOSURESUN_____NEM_HYDRA_II____
- SCSI\ENCLOSURESUN_____NEM_HYDRA_IIOPUS
- SCSI\ENCLOSURESUN_____NEM_P_10GBE_X10_
- SCSI\ENCLOSURESUN_____NEM_P_10GBE_X12_
- SCSI\ENCLOSURESUN_____NEM_PLUS________
- SCSI\ENCLOSURESUN_____NEMHYDRA_C10____
- SCSI\ENCLOSURESUN_____SS_J4200________
- SCSI\ENCLOSURESUN_____SS_J4300________
- SCSI\ENCLOSURESUN_____SS_J4400________
- SCSI\ENCLOSURESUN_____SS_J4500________
- SCSI\ENCLOSURESUN_____STORAGE_F5100___
- SCSI\ENCLOSURESUN_____STORAGE_J4200___
- SCSI\ENCLOSURESUN_____STORAGE_J4300___
- SCSI\ENCLOSURESUN_____STORAGE_J4310___
- SCSI\ENCLOSURESUN_____STORAGE_J4400___
- SCSI\ENCLOSURESUN_____STORAGE_J4410___
- SCSI\ENCLOSURESUN_____STORAGE_J4500___
- SCSI\ENCLOSURESUN_____SWITCH_24P_10GE_
- PCI\VEN_1000&DEV_0097&SUBSYS_35248086
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows 11, Windows 10) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).