DriverCove

Ricoh Company - Other hardware, Storage - Ricoh PCIe Memory Stick Host Controller Driver 6.10.10.27

by Ricoh Company8.18764-bit32-bitSHA-256 verified

Manufacturer
Ricoh Company
Device
Ricoh Company - Other hardware, Storage - Ricoh PCIe Memory Stick Host Controller
Driver version
6.10.10.27
Release date
June 1, 2011
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
100 KB
File name
20436106_b157fa34fa8905789d2782478ddf46a23f8a8b10.cab
INF version
06/01/2011, 6.10.10.27
INF provider
Ricoh Company
Device class
hdc
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
648979100bd8558caacc4ea6ea031e50621b5720a19fdcf688595be126f7e662

Supported hardware IDs (3)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).