DriverCove

DVICO Technologies Co. Ltd - Streaming Media and Broadcast Devices - FusionHDTV7 USB, Digital Capture(XC5000) Driver 1.0.0.1

by Dvico8732-bitSHA-256 verified

Manufacturer
Dvico
Device
DVICO Technologies Co. Ltd - Streaming Media and Broadcast Devices - FusionHDTV7 USB, Digital Capture(XC5000)
Driver version
1.0.0.1
Release date
January 12, 2007
Supported Windows
Windows 8, Windows 7
Architecture
32-bit (x86)
File size
199 KB
File name
20132263_8ab5a7dca52e04509584fba85a6109dd06479dd9.cab
INF version
01/12/2007,1.0.0.1
INF provider
DVICO Technologies Co. Ltd
Device class
MEDIA
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
b87556f68d8acaa0fe4a7353f550892e17b597994eda1dded6029e81c9707fa8

Supported hardware IDs (9)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8, Windows 7) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).