DriverCove

Driver update for Wireless-G Cable Gateway with 2 Phone Ports Driver 0.0.0.0

by Cisco-Linksys LLC.XP64-bit32-bitSHA-256 verified

Manufacturer
Cisco-Linksys LLC.
Device
Driver update for Wireless-G Cable Gateway with 2 Phone Ports
Driver version
0.0.0.0
Release date
November 8, 2005
Supported Windows
Windows XP
Architecture
64-bit (x64), 32-bit (x86)
File size
66 KB
File name
12323724_3d522bbe7ed0b57485079acca9f69c184c1dd04e.cab
Digital signature
Signed - catalog WCGP200.cat
INF version
11/08/2005,2.02.00.0000
INF provider
Cisco-Linksys, LLC
Device class
Net
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
6dfd4cafc865de2eadda247fce41aeaa00d95c21845362cc30a29949da20f163

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows XP) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).