DriverCove

DLink Corporation - Other hardware - DLink USB Remote NDIS Device Driver 5.2.3667.0

by D-Link8.18764-bit32-bitSHA-256 verified

Manufacturer
D-Link
Device
DLink Corporation - Other hardware - DLink USB Remote NDIS Device
Driver version
5.2.3667.0
Release date
July 5, 2007
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64), 32-bit (x86)
File size
57 KB
File name
20110530_42043fea2111516f2b33b064b45a1d4c7a465eb6.cab
Digital signature
Signed - catalog DLink.cat
INF version
07/05/2007,5.2.3667.0
INF provider
DLink Corporation
Device class
Net
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
1ef5838369e2850b2ee75089a0a5938935d532c2fc28b53d5f1f0b1e0be6ae68

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64, x86)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).