DriverCove

D-Link Corporation - Network - D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1 Driver 9.15.2.3

by D-Link8.18764-bitSHA-256 verified

Manufacturer
D-Link
Device
D-Link Corporation - Network - D-Link DGE-560SX Single Fiber Gigabit Ethernet PCI-E Adapter V.A1
Driver version
9.15.2.3
Release date
January 12, 2007
Supported Windows
Windows 8.1, Windows 8, Windows 7
Architecture
64-bit (x64)
File size
142 KB
File name
20030627_f9b8469234ca7b8685d3f34b62c5f7d226cfaf94.cab
Digital signature
Signed - catalog m4cxvst64.CAT
INF version
01/12/2007, 9.15.2.3
INF provider
D-Link Corporation
Device class
Net
Source
Microsoft Update Catalog
Last verified
July 8, 2026
SHA-256
6a2b74773f2233364d356d950be8244e930c1663ac58c0860ae281aae849bec2

Supported hardware IDs (1)

Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.

How to install

  1. Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
  2. Verify compatibility: your Windows version (Windows 8.1, Windows 8, Windows 7) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
  3. Download the file using the button - it comes directly from Microsoft Update Catalog.
  4. Optionally verify the checksum: open PowerShell, run Get-FileHash your-download.cab -Algorithm SHA256 and compare with the SHA-256 above.
  5. Extract the .cab archive: right-click → Extract All, or run expand -F:* file.cab C:\driver\ in Command Prompt.
  6. Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run pnputil /add-driver C:\driver\*.inf /install.
  7. Check Device Manager: the device should show no warning icons, and the driver version should match.

How to roll back

If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).