Conceptronic - Network - Conceptronic 150N Mini Wireless USB Adapter Driver 1.4.9.0
by ConceptronicXP64-bitSHA-256 verified
- Manufacturer
- Conceptronic
- Device
- Conceptronic - Network - Conceptronic 150N Mini Wireless USB Adapter
- Driver version
1.4.9.0- Release date
- November 19, 2009
- Supported Windows
- Windows XP
- Architecture
- 64-bit (x64)
- File size
- 379 KB
- File name
20339412_04316f1ce78202d9fe066ba1b2c16ced80cc297c.cab- Digital signature
- Signed - catalog
rt2870.cat - INF version
11/19/2009, 1.04.09.0000- INF provider
- Conceptronic
- Device class
- Net
- Source
- Microsoft Update Catalog
- Last verified
- July 8, 2026
- SHA-256
8844b87a759c981193769c4ca12ada891815e28e8160763153d05d8cf3af875b
Supported hardware IDs (10)
- USB\VID_148F&PID_2870
- USB\VID_148F&PID_2770
- USB\VID_148F&PID_3071
- USB\VID_148F&PID_3072
- USB\VID_148F&PID_2070
- USB\VID_148F&PID_3070
- USB\VID_148F&PID_3572
- USB\VID_148F&PID_3370
- USB\VID_148F&PID_8070
- USB\VID_7392&PID_3734
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows XP) and architecture (x64)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).