802.11n Network Adapter Driver 1.0.3.2
by Marvell8732-bitSHA-256 verified
- Manufacturer
- Marvell
- Device
- 802.11n Network Adapter
- Driver version
1.0.3.2- Release date
- September 11, 2007
- Supported Windows
- Windows 8, Windows 7
- Architecture
- 32-bit (x86)
- File size
- 168 KB
- File name
20092170_a550fc8e9f1bd3f01c3951d056424a82000255b6.cab- Digital signature
- Signed - catalog
MRVW24B.cat - INF version
09/11/2007, 1.0.3.2- INF provider
- Marvell
- Device class
- Net
- Source
- Microsoft Update Catalog
- Last verified
- July 8, 2026
- SHA-256
4612ba30a8e79629a7dfe34dd79c43f793b3abd4b9d278db3515a2bd5eca2cc9
Supported hardware IDs (11)
- USB\VID_13B1&PID_0029
- USB\VID_1799&PID_8051
- USB\VID_07D1&PID_3B10
- USB\VID_0846&PID_7100
- USB\VID_1286&PID_2006
- USB\VID_0B05&PID_172A
- USB\VID_0B05&PID_172B
- USB\VID_07D1&PID_3B11
- USB\VID_0411&PID_00CA
- USB\VID_0411&PID_00CB
- USB\VID_0846&PID_9000
Compare with your device: Device Manager → right-click the device → Properties → Details → Hardware Ids. If one of the values above matches, this driver supports your hardware.
How to install
- Create a restore point(Start → "Create a restore point" → Create), so you can roll back if anything goes wrong.
- Verify compatibility: your Windows version (Windows 8, Windows 7) and architecture (x86)must match this driver, and your device's Hardware ID should appear in the list above.
- Download the file using the button - it comes directly from Microsoft Update Catalog.
- Optionally verify the checksum: open PowerShell, run
Get-FileHash your-download.cab -Algorithm SHA256and compare with the SHA-256 above. - Extract the .cab archive: right-click → Extract All, or run
expand -F:* file.cab C:\driver\in Command Prompt. - Install via Device Manager: right-click your device → Update driver → Browse my computer → point to the extracted folder. Alternatively run
pnputil /add-driver C:\driver\*.inf /install. - Check Device Manager: the device should show no warning icons, and the driver version should match.
How to roll back
If the device stops working after the update: Device Manager → right-click the device → Properties → Driver tab → Roll Back Driver. If the button is greyed out, use the restore point from step 1 (Start → "Recovery" → Open System Restore).